Problem Solved with Uploaded Samples & Octave Naming not working

Posts: 53
Joined: Wed Apr 14, 2010 3:42 am

Problem Solved with Uploaded Samples & Octave Naming not working

Postby ElectricAlienCat » Sun Aug 01, 2010 12:16 am

Was uploading samples using the naming convention 'example_C5' and for some inexplicable reason
ThumbJam wasn't automatically setting the octave (in the instrument editor) for some notes to
what I specified in the filename. I tried renaming the files and all kinds of stuff and getting
very fustrated when it wasn't working or saving any manual changes to the octaves.

So, then I thought I'd start looking at the actual wave files to see if there are any differences from
working samples to non-working ones and low and behold when I zoomed right into the start of the wave I
discovered that the working ones had a tiny amount (like 1ms or less) of complete silence and the others were
starting into the sound and causing ThumbJam to disregard the octaves I wanted.

So there you go... always insert 1ms of silence before the start of the sound :-)

User avatar
Posts: 1040
Joined: Tue Dec 15, 2009 3:25 am

That certainly doesn't make

Postby Jesse » Sun Aug 01, 2010 7:54 am

That certainly doesn't make sense. I will look into it and see what the true cause of this might be.

Posts: 53
Joined: Wed Apr 14, 2010 3:42 am

That's what I thought... but

Postby ElectricAlienCat » Sun Aug 01, 2010 8:08 am

That's what I thought... but what I did made it work!

Posts: 9
Joined: Mon Jul 26, 2010 3:54 pm

Had the same problem and this

Postby Bristles » Wed Sep 29, 2010 2:35 am

Had the same problem and this worked, thanks.

Return to Bug Reports

Who is online

Users browsing this forum: No registered users and 1 guest