Edit/Controls/Pitch-bend mode doesn't save

Posts: 15
Joined: Thu Jun 04, 2015 10:10 am

Edit/Controls/Pitch-bend mode doesn't save

Postby smwells5 » Thu Jun 04, 2015 10:19 am

When changing the pitch-bend controller under 'Edit' / 'Contols' for any given instrument, you can choose between 'V. Tilt' / 'V.lin Tilt' / 'H. Tilt' / 'None'.

When a mode besides 'None' is chosen, and the pre-set saved, it always reverts back to 'None' next time it is accessed, regardless of what was saved.

Thanks

User avatar
Posts: 1021
Joined: Tue Dec 15, 2009 3:25 am

Re: Edit/Controls/Pitch-bend mode doesn't save

Postby Jesse » Thu Jun 04, 2015 2:03 pm

I'm not able to reproduce this here. Can you walk through the exact steps you are taking to load, modify, and save your preset?

Posts: 15
Joined: Thu Jun 04, 2015 10:10 am

Re: Edit/Controls/Pitch-bend mode doesn't save

Postby smwells5 » Fri Jun 05, 2015 10:19 am

Ok, here are the steps:

1. Choose Default instrument (Cello, for this example)

2. Choose 'Edit' button at lower left of screen.

3. Choose 'Controls'

4. At bottom of options screen is 'Pitch Bend' with selector plate to choose from 'V. Tilt', 'V.Inv Tilt', 'H. Tilt' and 'None'

5. Choose 'V.Inv Tilt' from selections

6. Click box w/ up-arrow at top right of screen

7. Click 'Save as new Preset'

8. Name it 'Cello Copy' and click 'Save'

9. Click 'Done' at top left of screen

10. Exit Thumbjam app

11. Re-open Thumbjam app

12.'Cello Copy' instrument opens by default

13. Click 'Edit' button at lower left of screen.

14. Click 'Controls'

15. See that 'Pitch Bend' selection panel at the bottom of the screen has 'None' selected.

I have to set this explicitly every time - it doesn't save with the preset.

Thanks

Posts: 15
Joined: Thu Jun 04, 2015 10:10 am

Re: Edit/Controls/Pitch-bend mode doesn't save

Postby smwells5 » Tue Jun 23, 2015 10:41 am

Jesse,

Were you able to reproduce the problem?

Hadn't heard a response on my steps.

I set PitchBend/V. Inv Tilt on every instrument I use, and this is now an intuitive mode of expression on the instrument.

Being able to move from one saved instrument to another during a performance without having to re-set this every time would be a tremendous benefit.

Thanks

User avatar
Posts: 1021
Joined: Tue Dec 15, 2009 3:25 am

Re: Edit/Controls/Pitch-bend mode doesn't save

Postby Jesse » Tue Jun 23, 2015 11:10 am

Ah, this seems to be a problem when choosing V Inv. Tilt only... the other options do restore properly. Another hint is that it doesn't display on the main play screen when V.Inv.Tilt is selected either. Thanks for the bug report!

Return to Bug Reports

Who is online

Users browsing this forum: No registered users and 2 guests